The Saber II R Series is a handheld radio from the Motorola Saber Series. This is a mid-range version, designed for legacy professional communication systems.

series offers configurations for different needs. According to product information,The Motorola Saber II series is no longer officially produced or supported by Motorola. However, the equipment is still of interest in the ham radio, hobbyist, and legacy radio systems market.

The mid-range version of the Motorola Saber Series

The Saber II R Series sits between the Saber I and Saber III in the Saber product line. The equipment has more features than the Saber I, while maintaining a compact and easy-to-operate design.

A highlight of the Saber II is its LCD display with a blue backlight. Additionally, the radio has 3 red buttons below the screen to aid menu navigation.

Easy-to-read 8-character LCD display

The Motorola Saber II is equipped with an LCD display showing 8 characters. The display has a blue backlight, allowing users to better view information in low-light conditions.

Additionally, the device does not have a full DTMF keypad. Therefore, operations are mainly performed through basic function buttons and menus.

Supports 48 or 120 channels depending on EEPROM

The Saber II R Series can support 48 or 120 channels depending on the memory version. With 2k EEPROM, the device usually has 4 zones, each with 12 channels.

With 8k EEPROM, the radio can support 10 zones, each with 12 channels. Therefore, the Saber II is more flexible than the Saber I in systems requiring more channel groups.

Supports MDC1200, MDC600, CTCSS, and DPL

The Saber II R Series can support MDC1200 and the older standard MDC600. These are common signaling formats in older Motorola radio systems.

Additionally, the device also supports CTCSSand in appropriate configurations. These technologies help improve the quality of positioning data when the operating area has corresponding augmented signal support.DPL. This allows users to configure signal filtering to match their existing analog system.

Has scan on some CN models

One difference between Saber II and Saber I is the capability ofscan. According to product information, the scan feature is available onCN.

models. However, not all Saber II versions have scan. Therefore, users need to check the correct model, firmware, and configuration before use.

Standard Saber II does not support trunking

The Saber II R Seriesstandard does not support trunking. If the system requires trunking, users should refer to the does not support trunking. Some newer series or newer Motorola models.

This is very important when replacing equipment. If the wrong series is chosen, the radio may not function correctly in a trunked system.

Securenet and DES encryption capability depending on the model

SomeThe Motorola Saber IIversions haveSecurenetcapability. These models may support voice encryption such asDES, depending on hardware and security modules.

Users can identify Securenet models by several indicators. Examples include models with the character "X" in the fifth position, a taller chassis, a rocker switch near the volume knob, or the lettering "SECURENET" on top of the radio.

VHF Low, VHF, and UHF Frequency Bands

The Saber II R Series supports three main frequency bands. Models H42 typically fall into the VHF Low 66–88 MHz.

band. Models H43 typically fall into the operation band. Meanwhile, models H44 typically fall into the version, but it was only in low power mode. For the .

However, the model number usually only helps identify the frequency band group. It does not always indicate the exact sub-band split, so the actual device needs to be checked before programming.

Notes when using Saber II R Series

Because the The Saber II R Series is an old series of radios, users should check carefully before use. Items to check include battery, antenna, charger, buttons, screen, switch, and programmability.

In addition, it is necessary to correctly identify the frequency range, zone, number of channels, and Securenet feature. This helps avoid compatibility errors when integrating the radio into an existing system.

Suitable for Cruise, Energy, Merchant, and Ferry.

• Handheld radio The Motorola Saber II.
• Mid-range version in the Saber Series.
• 8-character LCD display with blue backlight.
• Has 3 red buttons below the screen for menu operations.
• No full DTMF keypad.
• rudder limit setting48 or 120 channels per EEPROM.
• rudder limit settingMDC1200, MDC600, CTCSSand in appropriate configurations. These technologies help improve the quality of positioning data when the operating area has corresponding augmented signal support.DPL.
• Scan support on some models CN.
• Some models support Securenet/DES.
• Support VHF Low, VHF, or UHF depending on the model.

Benefits of using

The Saber II R Series suitable for users who need to maintain or service old Motorola Saber systems. The device has a familiar, recognizable design and is compatible with many previous-generation analog systems.

Additionally, the 8-character LCD screen makes operation more convenient than the Saber I. Users can view channel information or basic status directly on the device.

The ability to support 48 or 120 channels makes the Saber II more flexible in environments with multiple communication groups. Furthermore, MDC1200, CTCSS, and DPL help the radio easily integrate with old Motorola systems.

Some Securenet models may support DES encryption. Therefore, the device remains valuable for users who need to look up, repair, or collect previous-generation Motorola radios.

Suitable audience

• Users who are maintaining systems Motorola Saber Series.
• Ham radio and hobbyist group.
• The engineering team needs to look up Saber II configuration.
• Analog systems require MDC1200, CTCSS, or DPL support.
• Users need a Saber radio with an LCD screen.
• The unit needs to differentiate between Saber I, Saber II, Saber III, and Systems Saber.
• Users need to check for Securenet/DES capability depending on the model.
• The system needs to replace or cross-reference Saber Series accessories.

What is the Intellian OW130L?

What is the Saber II R Series?

The Saber II R Series is a Motorola handheld radio from the Saber Series, featuring an 8-character LCD screen and 3 menu buttons below the display.

Is the Motorola Saber II still manufactured?

antenna unitThe Motorola Saber II is no longer officially manufactured or supported by Motorola.

How many channels does the Saber II have?

The Saber II can support48 or 120 channelsdepending on the EEPROM. The 2k version usually has 4 zones, while the 8k version can have up to 10 zones.

Does Saber II support scanning?

Yes, on some modelsCN. However, you need to check the correct model and configuration before using this feature.

Does Saber II support trunking?

antenna unitSaber IIline is the group that supports trunking. does not support trunking. Some newer Does Saber II support encryption?

and can use encryption such as

Some models supportSecurenet, depending on the module and hardware configuration.DESWhat frequency bands does Saber II support?

Saber II supports

depending on the model. Check the actual sub-band split before programming.VHF Low 66–88 MHz, operationMX575C DGPS Compass version, but it was only in low power mode. For the depending on the model. Check the actual sub-band split before programming.